This list comprises only of 7 and 9 inch Angle Grinders. For small Angle Grinders, the 4 and 5 inch Models, please visit the 4 & 5 inch Angle Grinder Comparison
Note:
1. The Grinders listed below are all Large Type Grinders with Trigger Switch only. Some exceptions in this list have Model Numbers ending with *. Ex: Dewalt D28413*
2. All these models have 3 position handle mounts.
3. Model numbers ending with * may have some special feature like Soft StartAs the name indicates, the machine will start rotating slowly in the beginning and then gain its full speed. In large angle grinders, this feature... or Restart ProtectionA safety feature which prevents the machine restart during unexpected power cuts with the switch in lock position. This process is briefly explained below. Assume... which have been explained in the Note below.
Disclaimer: We don’t use any 3rd party ads. We only share affiliate links. If you make any purchase through these links, without any extra cost to you, we may receive a small commission to keep our site running.
| Type | Brand | Model | Power (watts) | RPM | Weight (kgs) | Anti Restart | Shop |
|---|---|---|---|---|---|---|---|
| 7 inch | Bosch | GWS 20-180 | 2000 | 8500 | 4.6 | No |  |
| 7 inch | Bosch | GWS 22-180 | 2200 | 8500 | 4.3 | No | |
| 7 inch | Bosch | GWS 24-180 | 2400 | 8500 | 5.5 | No | |
| 7 inch | Bosch | GWS 26-180 H | 2600 | 8500 | 5.9 | No | |
| 9 inch | Bosch | GWS 20-230 | 2000 | 6500 | 5.0 | No | |
| 9 inch | Bosch | GWS 22-230 | 2200 | 6500 | 5.4 | No | |
| 9 inch | Bosch | GWS 24-230 | 2400 | 6500 | 5.8 | No | |
| 9 inch | Bosch | GWS 26-230 H | 2600 | 6500 | 6.1 | No | |
| 9 inch | DCA | ASM02-230B | 2020 | 6600 | 6.5 | No | |
| 7 inch | Makita | GA7020 | 2200 | 8500 | 4.7 | No | |
| 9 inch | Makita | GA9020 | 2200 | 6600 | 4.7 | No | |
| 7 inch | Makita | GA7050 | 2000 | 8500 | 4.5 | No | |
| 7 inch | Makita | GA7050R* | 2000 | 8500 | 4.6 | Yes | |
| 9 inch | Makita | GA9050 | 2000 | 6600 | 4.7 | No | |
| 9 inch | Makita | GA9050R* | 2000 | 6600 | 4.8 | Yes | |
| 7 inch | Makita | GA7060 | 2200 | 8500 | 5.3 | No | |
| 7 inch | Makita | GA7060R* | 2200 | 8500 | 5.4 | Yes | |
| 7 inch | Makita | GA7061* | 2200 | 8500 | 5.5 | No | |
| 7 inch | Makita | GA7061R* | 2200 | 8500 | 5.5 | Yes | |
| 9 inch | Makita | GA9060 | 2200 | 6600 | 5.5 | No | |
| 9 inch | Makita | GA9060R* | 2200 | 6600 | 5.6 | Yes | |
| 9 inch | Makita | GA9061* | 2200 | 6600 | 5.7 | No | |
| 9 inch | Makita | GA9061R* | 2200 | 6600 | 5.7 | Yes | |
| 9 inch | Makita | GA9040S* | 2600 | 6600 | 6.7 | No | |
| 9 inch | Hikoki | G23SC3 | 2300 | 6600 | 5.0 | No | |
| 9 inch | Hikoki | G23SW2 | 2200 | 6600 | 5.1 | No | |
| 9 inch | Hikoki | G23ST | 2000 | 6600 | 5.1 | No | |
| 9 inch | Hikoki | G23SF2 | 2000 | 6600 | 4.3 | No | |
| 7 inch | Hikoki | G18SEY | 2600 | 8500 | 5.1 | No | |
| 7 inch | Hikoki | G18SE4 | 2400 | 8500 | 5.9 | No | |
| 7 inch | Hikoki | G18MR | 2400 | 8500 | 5.4 | No | |
| 7 inch | Hikoki | G18SE3 | 2300 | 8500 | 5.0 | No | |
| 7 inch | Hikoki | G18SW2 | 2200 | 8500 | 4.9 | No | |
| 7 inch | Hikoki | G18SH2 | 2000 | 8500 | 4.3 | No | |
| 7 inch | Hikoki | G18ST | 2000 | 8500 | 4.9 | No | |
| 7 inch | Dewalt | DWE493 | 2200 | 8500 | 5.1 | No | |
| 7 inch | Dewalt | D28413* | 2200 | 8500 | 4.7 | No | |
| 7 inch | Dewalt | DWE497 | 2600 | 8500 | 5.4 | No | |
| 7 inch | Dewalt | DWE4597* | 2600 | 8500 | 5.8 | Yes | |
| 9 inch | Dewalt | DWE492 | 2200 | 6600 | 5.2 | No | |
| 9 inch | Dewalt | DWE496 | 2600 | 6500 | 5.4 | No | |
| 9 inch | Dewalt | DWE4579* | 2600 | 6500 | 5.9 | Yes | |
| 7 inch | Eibenstock | EZW 180 I | 2300 | 8500 | 5.0 | No | |
Note:
1. GA7061/R and GA9061/R have Makita’s Super Joint System.
2. GA7020 and GA9020 also have variants with Soft StartAs the name indicates, the machine will start rotating slowly in the beginning and then gain its full speed. In large angle grinders, this feature... Feature. Those models are GA7020S and GA9020S. They don’t have Restart ProtectionA safety feature which prevents the machine restart during unexpected power cuts with the switch in lock position. This process is briefly explained below. Assume.... Models with Restart ProtectionA safety feature which prevents the machine restart during unexpected power cuts with the switch in lock position. This process is briefly explained below. Assume... have Soft StartAs the name indicates, the machine will start rotating slowly in the beginning and then gain its full speed. In large angle grinders, this feature... feature.
3. The Makita GA9040S has Soft StartAs the name indicates, the machine will start rotating slowly in the beginning and then gain its full speed. In large angle grinders, this feature... feature.
4. The Dewalt D28413 has 5 Position Handle feature for better user comfort.